Space-Saving
Four-Post Models
For Servicing
Automobiles and
Light Trucks Model
HD-9ST
Narrow Width
Model
HD-9
Standard Width
|
 |
Features |
- 9,000 pound lifting capacity
- Optional caster kit available
- Freestanding design
- Perfect for parking, storage or service
- Dual-position runways accommodate wide or
narrow vehicles
- Runways include rail kit for optional accessories
- Single hydraulic cylinder mounted underneath
runway
- Fully-enclosed lifting cables, safety locks,
and sheaves
- Internal "anti-sway" slider blocks
in each column
- Pneumatic push-button safety release
- Features heavy-duty 3/8" aircraft cable
- Longer approach ramps for low ground clearance
vehicles
- Safety locks enclosed in columns minimize
pinch points
- Oversized sheave diameter reduces cable
fatigue
- Rugged, self-lubricating cable sheaves combined
with 1-1/4" sheave axles are fully enclosed
minimizing pinch points
- Multi-position safety locks in each column
- Power unit can be located at the front or
rear of the lift.
- Designed to meet ANSI standards
- Approach ramps can be removed for added
clearance
- Independent "back-up" slack-cable
safety latches
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck increases storage capacity
- Optional 4,500 lb. "Low-Boy" air/hyd.
rolling jacks available
|
|
| These HD-Series car lift models were designed
and built for car aficionados who appreciate
quality and value. Not just quality design
but quality workmanship throughout, and not
value as in cheap but value as getting a lot
more bang for your buck. Sure, we could have
made them cheaper, but then they`d be like
all those non-certified `hobby` lifts on the
market. Please don`t make the mistake of calling
these lifts `hobby` lifts. Our engineers would
get offended. These `full-blown` lift models
come packed with features that until now were
found only on commercial-grade designs. Better
yet, their built and backed by a company with
over 35 years in the business. We`re proud
to have these lifts in our lineup because
they have one thing in common with our great
reputation. Both carry a lot of weight. |
|

Optional Drip-Trays Available |

Optional Caster-Kit
Available |
|
| FOUR-POST
GARAGE LIFTS |
| |
"HD-SERIES"
Commercial-Grade
Four-Post
Lift Series |
 |
Optional
Caster Kit Makes It Portable This
unique 4-piece swivel caster kit makes the lift
portable, with or without a vehicle. Now you can
store the lift when not in use, or bring it outside
where there's more space. |
|
- Wide or Narrow Take
Your Pick - Whether you're looking for
a narrow model to squeeze in your residence
or a standard model for wide access.
- Integrated Design
- Lifting cables, air lines, safety latches
and sheaves are all fully enclosed.
- Longer Approach Ramps
- These approach ramps were designed a little
longer to help when loading low ground-clearance
vehicles. A little bit that makes a big difference.
- Single Hydraulic
Cylinder - Each lift is equipped with
a single hydraulic cylinder hidden away under
the runway for maximum performance and reliability.
- Large Baseplates
- 12" x 12" baseplates provide solid
stability.
- Heavy Duty Aircraft
Cable - Each lift is supplied with four
high quality aircraft cables rated at 18,500
pounds each.
- Electric/Hydraulic
Power System - Each lift is designed using
a maintenance-free elctric hydraulic power
system for ultimate durability. All controls
are conveniently located within easy reach.
|
|
|
Optional
4-Ton Rolling Jack
|
Automatic
Safety Locks
We use aircraft quality stainless steel a& aluminum
pnuematic cylinders to release all four locks simultaneously
with a simple push of a button. The spring loaded
safety locks automatically engage continuously when
raising the lift. For added safety, a secondary
lock system acts as a slack-cable device automatically
engaging if an unexpected cable failure ever occured.
Lifting cables, air lines, safety latches &
sheaves are all fully enclosed. |
 |
|
Specifications
| MODEL |
HD-9ST |
HD-9 |
| Style |
Standard/Narrow |
Standard/Wide |
| Lifting Capacity |
9,000 lbs. |
9,000 lbs. |
| A - Overall Width |
103-3/4" |
120 -3/4" |
| B - Outside Length |
174" |
174" |
| C - Overall Length |
200" |
200" |
| D - Height of Columns |
86" |
86" |
| E - Min. Runway Height |
4-1/2" |
4-1/2" |
| F - Max. Rise |
70" |
70" |
| G - Lifting Height |
74-1/2" |
74-1/2" |
| H - Width btwn Posts |
89-3/4" |
106-3/4" |
| I - Runway Width |
19" |
19" |
| J - Width btwn Runways |
37-1/4" |
37-1/4" - 44" |
| K - Length of Runways |
164" |
164" |
| Lifting Time |
45-60 seconds |
45-60 seconds |
| Standard Motor* |
220V 60Hz 1Ph. |
220V 60Hz 1Ph. |
Different Voltages Available Upon Request
|
 |
|
|